| Litecubes can be customized in two different ways:
Inserts placed internally at the time of manufacture.
Pad Printing on the exterior of the cube.
PAD PRINTING
Pad printing can be performed on one or more exterior surfaces of the Litecube in one color using food grade ink.
The minimum quantity required for pad printing is a half a case (144 Litecubes). Different colors of cubes can be mixed in multiples of 24 cubes per color.
The time required for pad printing and shipping is approximately three weeks from approval of final acceptable artwork.
Specific artwork format information and potential additional charges apply. Please contact us for additional information or a quotation.
INSERTS
Four color inserts can be placed inside Litecubes when a minimum quantity of 9 cases (2,592 cubes)of any one color is ordered.
Color mixing must occur in increments of 288. Inserts require approximately three weeks to manufacture and eight weeks for shipping from the time of final acceptance of artwork. This time period may be shortened by selecting the air shipping option over the sea transit. Additional charges will be levied for air service.
Other charges may apply. Please contact us for additional information.
|
